爱泽工业2018年12月部分到货产品专题及库存

——ABB氧化锆分析仪篇

如下为我司爱泽工业IZE_Industries本月部分到ABB氧化锆分析仪相关产品，来电索取样本资料和产品信息。

ABB氧化锆探头AZ25-11251爱泽工业izeindustries

ABB氧化锆分析仪AZ25描述

AZ25燃烧氧气分析仪是ABB提供的一系列高品质燃烧气体分析仪中的新产品。AZ25设计用于测量高温炉气氛中的氧浓度。

基于氧化锆电池的传感器安装在探头的处，该探头直接插入炉中。由此产生的直接原位测量可提供准确，快速的氧气读数，用于燃烧控制/优化和过程质量控制目的。

原位技术在过程中提供真正的氧气测量。消除了在测量前提取和冷却气体样品的系统常见的“平衡偏移”。

需要参考空气（500至1000毫升/分钟[1至2立方英尺/小时]）才能实现操作，并且可以从ABB主电源泵单元或流量调节器单元供应。

应用

·炉内气氛监测

·退火炉

·金属烧结

·铁氧体烧结

·燃烧测量和控制：

 -浸泡坑

 -工艺加热器

 -流化床锅炉

 -高温焚烧炉

·烟气温度超过600°C（1112°F）的所有其他燃烧过程

探头长度可达1250 mm（49 in.）

多种探头插入长度允许在炉子或烟道内进行的传感器定位，以确保准确和有代表性的氧气测量。

全系列安装法兰，在需要全厂标准法兰或更换现有探头时提供简单安装。

远程发射器可以安装在离探头100米（328英尺）的位置。探头位置通常是高温，恶劣和难以接近的区域，长电缆长度的灵活性允许远程发射器的适当选址

护套材料选择

为确保材料与工艺条件的兼容性，可选择三种护套材料：

·铝质瓷器

 -入门级护套材料适用于温度高达1250°C（2282°F）的应用。

 -对腐蚀性化学品和机械和热应力的有限抵抗力。

·重结晶氧化铝

 -适用于温度高达1400°C（2552°F）的应用。

 -耐腐蚀性化学品和严重的机械和热应力。

·Incoloy 800

 -适用于水平安装时温度高达850°C（1562°F），垂直安装时温度高达1000°C（1832°F）的应用。

 -对腐蚀性化学品的耐受性有限，但耐机械和热应力。

Introduction

The Endura AZ25 combustion oxygen analyzer is the latest in a long line of high-quality, combustion gas analyzers from ABB. The AZ25 is designed to measure oxygen concentration in high temperature furnace atmospheres.

The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted directly into the furnace. The resulting direct, in-situ measurement provides an accurate and rapid oxygen reading, for combustion control /optimization and process quality control purposes.

The in-situ technique provides a true oxygen measurement inside the process. It eliminates ‘equilibrium shift’ that is common to systems in which gas samples are extracted and cooled before measurement.

Reference air (500 to 1000 ml/min [1 to 2 ft3 /hr]) is required for accurate operation and can be supplied from an ABB mains-powered pump unit or a flow regulator unit.

Applications

· Furnace atmosphere monitoring

· Annealing furnace

· Sintering of metals

· Ferrite sintering

· White heart malleablizing

· Combustion measurement and control in:

– Soaking pits

– Process heaters

– Fluidized bed boilers

– High temperature incinerators

· All other combustion processes where the flue gas temperature is in excess of 600 °C (1112 °F)

Probe lengths up to 1250 mm (49 in.)

A wide range of probe insertion lengths allows for optimum sensor positioning within the furnace or flue duct to ensure accurate and representative oxygen measurement.

A comprehensive range of mounting flanges, provide simple installation when plant-wide standard flanges are required or when replacing existing probes.

The remote transmitter can be mounted up to 100 m (328 ft.) from the probe. Probe locations are often high temperature, hostile and inaccessible areas, the flexibility of long cable lengths permits appropriate siting of the remote transmitter

Sheath material options

To ensure material compatibility with the process conditions there is a choice of three sheath materials:

· Aluminous porcelain

– Entry level sheath material suitable for applications with temperatures up to 1250 °C (2282 °F).

– Limited resistance to corrosive chemicals and mechanical and thermal stress.

· Recrystallized alumina

– Suitable for applications with temperatures up to 1400 °C (2552 °F).

– Resistant to corrosive chemicals and severe mechanical and thermal stress.

· Incoloy 800

– Suitable for applications with temperatures up to 850 °C (1562 °F) when mounted horizontally and up to 1000 °C (1832 °F) when mounted vertically.

– Limited resistance to corrosive chemicals but resistant to mechanical and thermal stress.

爱泽工业(IZE INDUSTRIES)*经销、常用ABB 氧化锆分析仪型号：

ABB 氧化锆分析仪AZ25.1.1.2.1.1.5.1.1.1.1.0.0.0.0

ABB 氧化锆分析仪AZ25.1.1.2.1.1.5.1.1.1.1.0.0.0.0.E./STD

​    

ABB氧化锆分析仪AZ20.112112221112100CSTD爱泽工业izeindustries

ABB氧化锆分析仪AZ20描述

AZ20是ABB提供的一系列高品质燃烧气体分析仪中的新产品。

基于氧化锆电池的传感器安装在插入烟道中的探头。由此产生的直接原位测量可为燃烧控制优化和排放监测提供准确，快速的氧气读数

探头长度可达4.0米（13.1英尺）

多种探头插入长度从0.5到4.0米（1.7到13.1英尺），可以安装到佳测量点，以便在管道内进行的氧气测量; 即使在大的烟气管道和烟囱中也是如此。

全系列安装法兰可在需要全厂标准法兰或更换现有探头时提供简单的安装。

变送器可以探测或远程安装在远100米（328英尺）的距离，从而为所有应用提供多种系统选项。安装在探头上的变送器选件可提供低的安装成本。然而，当操作上理想的探头位置不能为用户提供便利的访问时，远程安装的发射器提供了灵活性。

先进的设计

AZ20按照严格的标准设计和制造，即使在艰巨的应用中也可确保长时间*运行。

操作过程温度高达800°C（1472°F），可将系统适用性扩展到以前不可能的应用中，并在过程中实现的探头定位。

模块化设计减少了元件数量，提高了系统的稳健性和可靠性，简化了日常维护和维护。 完整的可追溯性确保只有高质量的材料才能用于分析仪的构造和严格的制造，检查和测试程序（符合标准ISO 9001），从而使监控器具有的质量和延长的探头寿命。

Introduction

The Endura AZ20 is the latest in a long line of high-quality, combustion gas analyzers from ABB.

The sensor, based on a zirconium oxide cell, is mounted at the tip of the probe that is inserted in the flue duct. The resulting direct, in situ measurement provides accurate and rapid oxygen reading for combustion control optimization and emissions monitoring.

Probe Lengths up to 4.0 m (13.1 ft.)

A wide range of probe insertion lengths from 0.5 to 4.0 m (1.7 to 13.1 ft.) enable installation to the optimum measuring point for accurate oxygen measurement within the duct; even in the largest flue gas ducts and stacks.

A comprehensive range of mounting flanges provide simple installation when plant-wide standard flanges are required or when replacing existing probes.

The transmitter can be probe- or remote-mounted at distances of up to 100 m (328 ft.), thus providing versatile system options for all applications. The probe-mounted transmitter option provides the lowest cost of installation. However, the remote-mounted transmitter provides flexibility when the operationally ideal probe location does not provide easy access for the user.

Advanced Design

Designed and manufactured to exacting standards, the Endura AZ20 ensures long periods of trouble-free operation in even the most arduous of applications.

The operating process temperature of up to 800 °C (1472 °F) extends system suitability into previously impossible applications and enables optimum probe location within the process.

The modular design, with reduced component count, improves the robustness and reliability of the system and simplifies routine maintenance and servicing. Complete traceability ensures only the highest quality materials are used in the analyzer's construction and rigorous manufacturing, inspection and testing procedures (to international standard ISO 9001) result in a monitor of superior quality with prolonged probe life.

ABB氧化锆分析仪AZ20系列的备件和配件

爱泽工业(IZE INDUSTRIES)*经销、常用ABB氧化锆分析仪型号：

ABB 氧化锆分析仪AZ20.1.2.2.2.1.2.2.3.3.7.1.1.2.E

ABB 氧化锆分析仪AZ20.1222122337112E

ABB 氧化锆分析仪AZ20.112112225111100C/STD

ABB 氧化锆分析仪AZ20.112112226111YFT

ABB 氧化锆分析仪AZ20.122122231112E/STD

ABB 氧化锆分析仪AZ20.2.2.2.1.2.2.3.3.7.1.1.21.0.0.E/STD

ABB 氧化锆分析仪AZ20.222122337112100E/STD

ABB 氧化锆分析仪AZ20.222122337112E/STD

ABB 氧化锆分析仪AZ20.ZFG2/231121110 3K220000052439

ABB 氧化锆分析仪AZ20/112112225111100C/STD

以上为本月部分到货ABB氧化锆分析仪相关产品，爱泽工业专业提供ABB 氧化锆分析仪全系列产品。

如果您有任何关于产品的相关技术咨询或者需要产品的相关技术资料与文档，请随时致电爱泽工业，或者访问网站,我们将尽全力解决您的问题。